Topics

Here is a list of all topics with brief descriptions:

[detail level 12]

I2C Commands	I2C protocol commands for direct hardware communication
I2C System Commands	System-level I2C commands for device control and configuration
I2C DUT Commands	Device Under Test I2C commands for configuration and identification
I2C Measurement Commands	I2C commands for data acquisition and measurement operations
I2C ADC Commands	I2C Analog-to-Digital Converter control and calibration commands
I2C Sweep Commands	I2C current-voltage sweep measurement and control commands
I2C Auxiliary Commands	I2C auxiliary subsystem control commands
I2C Memory Commands	I2C EEPROM and memory management commands
SCPI Commands	SCPI (Standard Commands for Programmable Instruments) interface commands
System Commands	System Commands for AMU Library
SCPI Measurement Commands	Commands for data acquisition and measurement
SCPI DUT Commands	Device Under Test configuration commands
ADC Commands	MEMory:ADC:CH#:GAIN[?]: Sets or queries EEPROM-stored ADC channel gain calibration (USB only)
Sweep Commands	ADC:CURRent:CALibrate:FULL: Performs full-scale calibration for current channel (USB only)
SCPI Auxiliary Commands	Auxiliary hardware control commands
Memory Commands	SYSTem:BOOTloader: Enters bootloader mode for firmware updates (USB only)